MIRA® AF6002

Superplasticiser based on new polymer, for enhanced retention of concrete workability

Product Description

MIRA® AF6002 is a new superplasticiser based on the latest polycarboxylate-type polymer technology; and with this, the concrete workability and rheology will be significantly enhanced. MIRA AF6002 contains no added chlorides and complies with EN934-2:2001. One litre weighs approximately 1.08kg ± 0.02kg.

Applications

Concrete using MIRA AF6002 can now perform to extreme workability characteristics for high slump; and especially ideal for use in any concrete where it is desired to keep the water-cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. In the case of tremie concreting or other applications where high middle slump are desired, the addition of MIRA AF6002 will fluidise concrete.

Product Advantages

  • Long slump life with controlled set times.
  • High slump concrete less susceptible to segregation and bleeding.
  • Highly efficient in producing high/middle slump concrete with no loss in strength.
  • Easily added with the concrete mix water for rapid batching.

Addition Rates

Depending on the application, dosage rates can range from 200 to 1,500mL / 100kg of cementitious material. However, in most superplasticiser applications, 200 to 1,000mL / 100kg of cementitious material will be sufficient. For best results, MIRA AF6002 should be added with the mix water. At a given watercement ratio, the slump required for placement can be controlled by varying the addition rate. Should job site conditions require using more than recommended addition rates, please consult your local GCP Representative.

Compatibility with Other Admixtures

In concrete containing MIRA AF6002 the use of an air-entraining agent (such as DARAVAIR® or DAREX AEA® ) is recommended to provide suitable air void parameters for resistance against freeze-thaw attack. Due to synergistic effects between MIRA AF6002 and airentraining agents, the quantity of air-entraining admixture added to concrete containing MIRA AF6002 may be reduced. Please consult your GCP Representative for dosage guidance. Except naphthalenebased products, most water reducers or water-reducing retarders are compatible with MIRA AF6002 Superplasticiser as long as they are added separately to the concrete. Caution should be exercised when using MIRA AF6002 with a retarder, as excessive retardation can occur if the admixture dosages are too high. Pre-testing of the concrete should be performed to optimise dosages and addition times of these admixtures. The admixtures should not be in contact with each other before they enter the concrete.

Dispensing Equipment

To achieve maximum performance, Circulation pump will be installed in the bulk storage tanks. A complete line of admixture dispensers is available. Accurate and easy to maintain, the dispensers are easily adapted to new or existing batching plants.

Packaging

MIRA AF6002 is available in bulk and in 205L drums. MIRA AF6002 contains no flammable ingredients. It will begin to freeze at approximately 0°C, but will return to full strength after thawing and thorough agitation. For storage, and for proper dispensing, MIRA AF6002 should be maintained at temperatures above 0°C.

Health and Safety

See MIRA AF6002 Material Safety Data Sheet.

gcpat.my | For technical information: asia.enq@gcpat.com

We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.

MIRA, Daravair and Darex AEA are trademarks, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.

© Copyright 2017 GCP Applied Technologies, Inc. All rights reserved.


GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP Applied Technologies (Malaysia) Sdn. Bhd, 7 Lorong CJ 1/1A, Off Jalan Balakong, 43200 Cheras Jaya, Kuala Lumpur, Malaysia
This document is only current as of the last updated date stated below and is valid only for use in Malaysia. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.my. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.

Last Updated: 2022-11-24

https://gcpat.my/en-gb/solutions/products/mira-mid-range-water-reducers/mira-af6002