Dispersion
Darex Super 20 is a superior dispersing admixture having a marked capacity to disperse the cement agglomerates normally found in a cement-water suspension. The capability of Darex Super 20, in this respect, exceeds that of normal water-reducing admixtures.
Product Advantages
- High slump flowable concrete at no loss in strength.
- Low water-cement ratio concrete and therefore, high strengths.
- In prestress/precast work, can be used to substantially reduce or eliminate the high energy requirements of external heat for accelerated curing.
- Can be used with Type I cement to substitute for normal concrete produced with Type III cement to achieve early release strengths.
- Exhibits no significant segregation even at high slump.
- Aids in rapid discharge of concrete from truck mixers, thereby reducing time and improving mixer utilisation.
Applications
Darex Super 20 produces concrete with extremely workable characteristics referred to as high slump, flowing concrete. Darex Super 20 also allows concrete to be produced with very low watercement ratios at low or normal slumps.
Darex Super 20 is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation. Darex Super 20 will also fluidise concrete making it ideal for tremie concreting or other applications where high slumps are desired.
Compatibility with Other Admixtures
In concrete containing Darex Super 20, the use of an air-entraining agent (such as DARAVAIR® or DAREX® AEA®) is recommended to provide suitable air void parameters for resistance against freeze-thaw attack.
Most water reducers or water-reducing retarders are compatible with Darex Super 20 as long as they are separately added to the concrete. Pretesting of the concrete should be performed to optimise dosages and addition times of these admixtures. Caution should be exercised when using Darex Super 20 together with a retarder, as excessive retardation can occur if the admixture dosages are too high.