CONCERA™ SA8716 is an admixture within the CONCERA family of admixtures specifically developed to produce Control Flow Concrete, a high flow concrete that uses conventional mix designs. CONCERA SA8716 is a highly efficient, polycarboxylate-based superplasticiser that not only extends slump-flow life but also provides extreme workability without segregation to concrete. It is supplied as a readyto-use liquid that weighs approximately 1.06 ± 0.02kg / L. There are no intentionally added chlorides within CONCERA SA8716.
CONCERA SA8716 will produce highly flowable, conventionally proportioned Control Flow Concrete that has slump flows between conventional and self-compacting concrete.
Control Flow Concrete is a highly flowable concrete utilising conventional mix designs, which requires minimal external energy to properly compact. Control Flow Concrete produced with CONCERA SA8716 high range water-reducing admixture has unique advantages compared to conventional flowing concrete and/ or self-compacting concrete.
CONCERA SA8716 is an easy-to-dispense liquid admixture. Dosage rates can be adjusted to meet a wide spectrum of concrete mix proportions and performance requirements. Addition rates will normally range from 500 to 2,000 mL/100 kg of cementitious material, depending on actual applications. Should conditions require using more than the recommended addition rate, please consult your GCP Applied Technologies representative.
CONCERA SA8716 is compatible with most GCP admixtures as long as they are added separately to the concrete mix, usually through the water holding tank discharge line. In general, it is recommended that the product be added to the concrete mix near the end of the batch sequence for optimum performance. Please consult your GCP Applied Technologies representative for guidance.
A complete line of accurate, automatic dispensing equipment is available.
CONCERA SA8716 is available in bulk, delivered by metered tank trucks, in totes, and drums. CONCERA SA8716 will begin to freeze at approximately 0°C but will return to full strength after thawing and thorough agitation. In storage and for proper dispensing, the temperature should be maintained above 0°C.
See CONCERA SA8716 Material Safety Data Sheet or consult GCP Applied Technologies.
Australia 1800 855 525 New Zealand +64 9 448 1146 China Mainland +86 21 3158 2888 Hong Kong +852 2675 7898 India: Chennai +91 44 6624 2308 Delhi +91 124 402 8923 Indonesia +62 21 893 4260 Japan +81 3 5226 0231 Korea +82 32 820 0800 Malaysia +60 3 9074 6133 Philippines +63 49 549 7373 Singapore +65 6265 3033 Thailand +66 2 709 4470 Vietnam +84 8 3710 6168
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
CONCERA is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies, Inc. This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2017 GCP Applied Technologies, Inc. All rights reserved.
GCP Applied Technologies Inc., 2325 Lakeview Parkway, Alpharetta, GA 30009, USA
GCP Applied Technologies (Malaysia) Sdn. Bhd, 7 Lorong CJ 1/1A, Off Jalan Balakong, 43200 Cheras Jaya, Kuala Lumpur, Malaysia
This document is only current as of the last updated date stated below and is valid only for use in Malaysia. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.my. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2022-11-24
https://gcpat.my/en-gb/solutions/products/concera-sa8716